View Gardening .com

belt bilt lawn mowers troy

Stens

Lawn Mowers


Stens 265-156 Belt Replaces Troy Bilt GW-1128-1 GW-1128 Kit 1128 1128-1 22-Inch by-1/2-inch
(Lawn Patio) Stens

Requires 2 belts for Troy Bilt GW-1128
Length 22-inch; Width-1/2-inch
Available only as a set from Troy Bilt


Price: $20.76 $13.90

Answers

my tranmission pully keeps coming off my troy bilt lawn mower. whats causing it?

i have all new belts


If the pulley is attached with a bolt or nut, replace it right away. That includes any flat or lock washers. If you don't see any kind of washers, then they were lost the first time you lost pulley.
And spend a few extra bucks on a small tube of RED Loctite, red is the "permanent" version.
Check for worn spots and "wallowing" that will cause a chronic problem where the pulley is supposed to stay.

2007-07-18 18:58:46 by brez78

How to Replace the Deck Belt on a Troy-Bilt Riding Mower Using Part ...


Watch Troy-Bilt show you how to change the deck belt on a riding lawn mower. This particular video shows step-by-step instructions using the model ...

self-propelled lawn mower belt loose?

I have a Troy-Bilt self propelled lawn mower which drive belt loose and came off. I put it back, worked for a while and then the lawn mower had to be pushed very hard. I think the belt is not good anymore. Where can I buy a new one? how much it costs?


Go to:
http://wssemw.arinet.com/scripts/EmpartI SAPI.dll?MF

and select Troy-Bilt. As long as you know the model of mower you have, you should be able to find & order it there. Good luck !

2008-04-15 07:20:57 by tam n

1/2 X 35" Premium Belt. Replacement Belt for MTD 954-0101A, 754-0101A, 954-0101, 954-0101; Murray 581264, 581264MA; Ariens 72076, 07207600, 72156, 07215600; More.
ROTARY

Price: $8.75 $4.49

Quality Rotary 1/2 X 35" belt to replace MTD 754-0101A
Same size as the FSP at much lower cost.

Hello, Does anyone know how to replace a belt on a Troy-Bilt walk behind, self propelled. Model 12A 446A011?

The drive belt slipped off, trying to get it back on. Pushing the lawn mower to cut my lawn not nearly as fun as having it prople itself


whether this is a rear or front wheel drive model, you should just be able to life off the cover. there is a tension that is operated when you pull the handle. when that is lose, your belt should slip off or on relatively easily. otherwise yes, a screw driver might come to some assistance. just use caution as to you don't want to bend the pulley leading to future issues! good luck!!!

JK

2008-08-09 08:44:38 by Damian B

754-0486, 754-0486A, 954-0486, 954-0486A, Replacement belt made with Kevlar. For MTD, Cub Cadet, Troy Bilt, White, YardMan
Pix

Made with Kevlar to OEM specs
Kevlar is stronger than polyester made belts.


  • Buy Cheap

    • my troy bilt self propelled mower runs too slow... - JustAnswer

    Ok, this is one of those personal pace mowers... as irony would have it i have 1 also i use for my own lawn.. yes i would have to wonder about that cable.. as that would effect it.. on the back of the mower underneath the flap where the bag unit goes.. there should be a model # there.. did you use that number when getting your parts? if not i would say chances are they gave you the wrong cable as there are about a half dozen different sizes.. see what you can find out about that and let me know.. if the #'s are both OEM and both are diferent.. then they are infact different sizes..If the cable is right then the belt is to big.. i recommend swapping out the belt and see if that changes the performance.. i dont believe you have any problems with the gear box for or gearing being that the unit worked as it should before the replacements Disclaimer: Information in questions, answers, and other posts on JustAnswer ("Posts") comes from individual users, not JustAnswer; JustAnswer is not...

    Read more...